How to Tell When a Scraper Blade Needs Replacing
Five signs a belt scraper blade is due for replacement, and how to check it safely.
A worn blade cleans badly long before it fails completely. Check for these signs at every planned stop.
1. The wear line is showing
Most polyurethane blades have a moulded wear line. Once the blade has worn down to it, replace it.
2. Carryback is back on the return idlers
If material starts building up again on idlers or under the conveyor, the blade is no longer in full contact.
3. The tensioner is at the end of its travel
A spring tensioner that has no adjustment left means the blade is too short to hold pressure.
4. The blade edge is rounded or grooved
Channels worn into the blade let carryback straight through.
5. Tungsten tips are chipped or missing
On a secondary scraper, a missing tip leaves a stripe of dirty belt and can damage the cover.
Always lock out and isolate the conveyor before checking a scraper.
Need help choosing?
Answer six questions and get a recommended primary and secondary scraper.